Transcend 110Q 1TB M.2 NVMe SSD

Transcend 110Q 1TB M.2 NVMe SSD

The Transcend 110Q 1TB NVMe SSD Utilizes Top-Notch Technology QLC 3D NAND To Enhance Storage Density That Supports Read/Write Intensive Workloads. Implemented With PCI Express Gen3 X4 High-Speed Interface, The Read Speed Is Up To 2,000 MB/S While Write Speed Is Up To 1,500 MB/S. To Upgrade Your Computing Devices, Transcend 110Q 1TB NVMe SSD Is The Most Economical Solution For All. Transcend 110Q 1TB NVMe SSD Follows NVMe 1.3 And Utilizes The PCIe Gen3 X4 Interface, Meaning Four Lanes Are Used For Transmitting And Receiving Data Simultaneously, Resulting In Compelling Performance Of Up To 2,000MB/S Read And 1,500MB/S Write. Leveraging QLC 3D NAND Technology, Transcend 110Q 1TB NVMe SSD Stacks 4-Bit-Per-Cell Vertically To Enhance The Storage Density. QLC NAND Supports Read/Write Intensive Applications, And Leads Transcend 110Q 1TB NVMe SSD To Become One Of The Flash Memories With The Highest Density In The Market. More Than That, 1TB Storage Options Are Available. Users Can Store As Much Data As They Want!NVMe(Or NVM Express) Is A Host Controller Interface Standard Designed To Address The Needs Of Enterprise And Client Applications That Utilize PCIe(PCI Express) Solid-State Storage. NVMe Calls For Better Performance Vectors Than AHCI (Advanced Host Controller Interface), Including Scalable Bandwidth, Increased IOPS, And Low Latency. Transcend 110Q 1TB NVMe SSD Not Only Optimizes The Transfer Speeds And Storage Density, Its Low-Power Consumption Also Makes The Device Even More Lasting And Efficient. The Most Economical Solution Is Up To You To Choose. To Keep Your Transcend SSD Running Fast And Error-Free, Transcend's SSD Scope Software Application Is Available For Download Free Of Charge. Monitor Your SSD's Health Status With S.M.A.R.T. Technology, Enable The TRIM Command For Optimum Write Speeds, Keep Your SSD's Firmware Up-To-Date, And Migrate Data From Your Original Drive To A New SSD With Just A Few Clicks.

Best performance in the extreme

The Transcend's PCIe SSD 110Q adheres to NVMe 1.3 and employs the PCIe Gen3 x4 interface, which means four lanes are utilized for transferring and receiving data at the same time, resulting in an impressive performance of up to 2,000MB/s read and 1,500MB/s write.

Less is more

The Transcend 110Q 500GB NVMe M.2 PCle SSD uses QLC 3D NAND technology to stack 4-bit-per-cell vertically to increase storage density. QLC NAND provides read/write-intensive applications, propelling SSD 110Q to the market's highest-density flash memory. In addition, 500GB and 1TB storage choices are available. Users are free to save as much info as they desire.

Understanding the NVMe PCIe interface

NVMe (or NVM Express) is a host controller interface standard that was created to meet the demands of enterprise and client applications that use PCIe (PCI Express) solid-state storage. NVMe requires more performance vectors than AHCI (Advanced Host Controller Interface), such as scalable bandwidth, greater IOPS, and reduced latency.

Low power, high efficiency

The Transcend 110Q 500GB NVMe M.2 PCle SSD not only improves transfer speeds and storage density, but its low power consumption extends the device's life and efficiency. It is up to you to select the most cost-effective solution.

Features:

• PCIe Gen3 x4 interface
• NVMe 1.3 standard
• Up to 2,000 MB/s read; 1,500 MB/s write
• 3D NAND flash memory
• Engineered dynamic thermal throttling mechanism