Crucial 8GB DDR5 4800MHz UDIMM Desktop RAM
The Crucial 8GB DDR5 4800MHz UDIMM Desktop RAM is a high-speed memory module designed for use in desktop computers. It has a capacity of 8GB, which means it can store a large amount of data for quick access by the computer's processor. The memory has a speed of 4800MHz, which is faster than the typical DDR4 memory, this means it can transfer data to the processor at a faster rate. DDR5 is the latest generation of memory technology and it is faster, more energy efficient and with higher capacities than its predecessor DDR4.
The voltage required to run the memory is 1.1V, which is lower than DDR4 and helps to reduce power consumption. CAS Latency of 20 which indicates how many clock cycles it takes for the memory to respond to a command. It is Non-ECC (Error Correction Code) which means that it does not have the ability to detect and correct data errors.
Extreme Innovation for Stable Performance
Crucial DDR5 RAM is a technical leap forward from the previous generation, featuring two separate 32-bit channels per module for optimized performance. Crucial DDR5 is built to maintain the same dependability as the previous generation, even with the hard demands of next-generation computing, thanks to on-die ECC (ODECC) at the component level.
Optimized Power Efficiency
Crucial DDR5 Memory introduces on-module voltage regulation with a power management integrated circuit (PMIC), which was previously found on the motherboard with prior memory technologies, for greater efficiency and stability. This leads to better signaling and cleaner power for the modules (DIMMs). Furthermore, DDR5's on-module operating voltage is merely 1.1V, compared to 1.2V for DDR4.
Features:
- Harness blazing speeds at -4800MHz - 1.5x faster than DDR4
- Crucial 8GB DDR5 Game at higher frame rates and run demanding software with nearly 2x the bandwidth of DDR4
- Empower your system for the next-generation multi-core CPUs
- Crucial 8GB DDR5 Optimize efficiency with DDR5's innovative improvements and on-module power management
- ECC Type = Non-ECC, Form Factor = UDIMM, Pin Count = 288-pin, PC Speed = PC5-38400, Voltage = 1.1V
You can visit our facebook page if you want.